Your vehicle maintains a consistent gap from
the vehicle ahead until:
• The vehicle in front of you accelerates to
a speed above the set speed.
• The vehicle in front of you moves out of
the lane you are in.
• You set a new gap distance.
The system applies the brakes to slow down
your vehicle to maintain a safe gap distance
from the vehicle in front of you. The system
only applies limited braking. You can override
the system by applying the brakes.
Note: The brakes may emit noise when
applied by the system.
If the system determines that its maximum
braking level is not sufficient, an audible
warning sounds, a message appears in the
instrument cluster display and an indicator
flashes when the system continues to brake.
Take immediate action.
CANCELING THE SET SPEED
Press the button or tap the brake
pedal.
The set speed does not erase.
RESUMING THE SET SPEED
Press the button.
The vehicle speed returns to the previously
set speed and gap setting. The set speed
displays continuously in the information
display when the system is active.
Note: Only use resume if you are aware of the
set speed and intend to return to it.
Resuming the Set Speed from a
Complete Stop
Without an Active BlueCruise Service
Plan:
If your vehicle follows a vehicle to a complete
stop and remains stationary for less than a
few seconds, your vehicle accelerates from
a stationary position to follow the vehicle
ahead.
With an Active BlueCruise Service Plan:
If your vehicle follows a vehicle to a complete
stop and remains stationary for less than
approximately three minutes, your vehicle
accelerates from a stationary position to
follow the vehicle ahead.
The following conditions must be met before
your vehicle auto-resumes:
• You are facing forward and paying
attention to the road ahead.
• The road is clear of obstacles such as
pedestrians or other vehicles crossing
your path.
261
Expedition (TBD) Canada/Mexico/United States of America, enUSA, Edition date: 202406, DOM
Adaptive Cruise Control
To Next Page
Loading...
