4.3.8 Auxiliary Lighting Loads (Vehicles with
Special Equipment Pack)........................73
4.3.9 Auxiliary Lighting Loads (Vehicles
without Special Equipment Pack)
(Low Level Vehicles Only).......................76
4.3.10 Lamps – Hazard / Direction
Indication.......................................................78
4.3.11 Electrically Operated Door Mirrors.......78
4.3.12 Centre High Mount Stop Lamp
(CHMSL) - Canopy Fitment -Low Level
Vehicles...........................................................79
4.3.13 Centre High Mount Stop Lamp
(CHMSL) - Canopy Fitment - High
Level Vehicles..............................................80
4.4 Fuses and Relays................................81
4.4.1 Low Level and High Level Vehicles.......81
4.4.2 Auxiliary Battery and Fuse Box - Low
Level Vehicles................................................81
4.4.3 Auxiliary Fuse Box (Vehicles with
Special Equipment Pack) (Low Level
Vehicles Only)..............................................82
5 Body and Paint
5.1 Body....................................................85
5.1.1 Body Structures - General
Information...................................................85
5.1.2 Integrated Bodies and
Conversions..................................................85
5.1.3 Chassis Cab..................................................86
5.1.4 Front End Integrity for Cooling, Crash,
Aerodynamics and Lighting....................89
5.1.5 Tipper Bodies...............................................89
5.1.6 Tank and Dry Bulk Carriers......................90
5.1.7 Genuine Ford Accessory Bull Bar.........90
5.1.8 Roof Racks.....................................................91
5.1.9 Canopies........................................................92
5.2 Airbag Supplemental Restraint
System (SRS).....................................95
5.2.1 Air Bags - (Low Level Vehicles).............95
5.2.2 Air Bags - (High Level Vehicles)............98
5.2.3 Supplementary Restraint Sensors
(Front)...........................................................102
5.3 Seatbelt Systems – Australia..........103
5.4 Corrosion Prevention.......................104
5.4.1 General.........................................................104
5.4.2 Repairing Damaged Paint.....................104
5.4.3 Under Body Protection and
Material.........................................................104
5.4.4 Painting Road Wheels............................104
5.4.5 Contact Corrosion....................................104
5.5 Frame and Body Mounting...............105
5.5.1 Mounting Points and Tubing................105
5.5.2 Self-Supporting Body Structure.........106
5.5.3 Frame Drilling and Tube
Reinforcing...................................................107
5.5.4 Ancillary Equipment - Sub Frame
Mounting......................................................107
5.5.5 Area for Fitting Additional Body
Attachments to the Rear of the
Bumper. ........................................................107
5.5.6 Water Tank on Camper Vehicles.........107
Table of Contents
4