DetailsMessage
Cruise control does not resume automatic-
ally when this display is active.
Stopped
If the lead vehicle begins to move, you are
prompted to press the resume button.
Press button to resume
Press and release the button or use the
accelerator pedal to resume following the
lead vehicle.
Displays when on a limited access highway
after following a vehicle to a complete stop.
In this situation, the vehicle resumes
following the lead vehicle without a button
press or pressing the accelerator pedal. The
system can remain in auto-resume state
for approximately 30 seconds, after which
it no longer automatically resumes.
Auto-Resume
OVERRIDING THE SET SPEED
WARNING: If you override the
system by pressing the accelerator
pedal, it does not automatically apply
the brakes to maintain a gap from any
vehicle ahead.
When you press the accelerator pedal, you
override the set speed and gap distance.
Use the accelerator pedal to intentionally
exceed the set speed limit.
When you override the system, the
indicator remains blue, the set speed is
dimmed and the lead vehicle icon does not
appear in the instrument cluster display.
The system resumes operation when you
release the accelerator pedal. The vehicle
speed decreases to the set speed, or a
lower speed if following a slower vehicle.
300
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Adaptive Cruise Control (If Equipped)
To Next Page
Loading...
