ANALYZER SPECIFICATIONS
Warranty: 1 year limited warranty
Sensor: Electrochemical for all gases except- Catalytic for
%LEL and NDIR for CO2
Sensor Life: 2-3 years
Error: <±5% F.S.
Response Time: <30 seconds
Store/Oper. Temp: 0°F - 122°F
Store/Oper. Humidity: <95%RH
Battery: DC3.7V Li–Ion battery 3200mAh
Charging Time: 4 hours
Operation Time: >10 hours
Dimension/Weight: 5.1 x 2.6 x 1.2 inches, 400grams Rating:
ATEX certified Ex ib IB T4 Gb. IP65 .
Pump Noise: <60dB
Inlet Air Barb: 3mm diameter
CARRY CASE DETAILS
Weight: 1.6lb with analyzer and all accessories
Dimension: 9 x 7 x 5 inches
Our Model FD-600 Analyzer is prepared for
three primary applications:
1. Air Quality Analyzer: Used for air quality measurements and comes
with tubing and a telescopic probe. Used for indoor air quality to
detector many gases such as CO, O2, O3, NH3, H2S, combustibles,
NOx, SO2 and many others.
2. Headspace Analyzer: Used to measure modified atmosphere
packaging (headspace) and comes with filters, needles tubing and
septa. Comes in O2 or O2/CO2 variants.
3. Welding Analyzer: Use to measure depleted oxygen to ensure good
welding with minimal oxygen. Comes with tubing, filters and a stainless-
steel probe.
To Next Page
Loading...