8
Disclaimer: Users of this device do so at their own risk. Neither FOREO nor its retailers assume any responsibility or liability
for any injuries or damages, physical or otherwise, resulting directly or indirectly from the use of this device. Furthermore,
FOREO reserves the right to revise this publication and to make changes from time to time in the contents thereof without
obligation to notify any person of such revision or changes.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Model may be changed for improvements without notice.
SPECIFICATIONS
MATERIALS: Body-safe silicone & PC + ABS, Aluminium Alloy
COLOR: Pearl Pink/Arctic Blue/Fuchsia/Black
SIZE: 72.5 mm x 31.4 mm
WEIGHT: 146.2g
BATTERY: Li-Ion 1200mAh 3.7V
TEMPERATURE: 5 - 45 Degrees Celsius
USAGE: Up to 50 mins per charge
STANDBY: 180 days
FREQUENCY: 180 Hz
MAX NOISE LEVEL: <50 dB
INTERFACE: 1-button
BATTERY REMOVAL
NOTE: This process is not reversible. Opening the device will void its warranty. This action must only be undertaken when
the device is ready to be disposed of.
Because this device contains a lithium-ion battery, the battery must be removed before disposal and should not be thrown away
with household waste. To remove the battery, open the inner plastic shell after removing silicone outer layer and remove the
battery to be disposed of in accordance with your local environmental regulations. Wear gloves during this process for your safety.
Detailed visual instructions are provided below.
1 42 53 6
To Next Page
Loading...
