02/2020 WDOC Diamond Sense www.forestgroup.com v1.4
FOREST DIAMOND SENSE REMOTE – 520109X470
Content:
Technical specification and battery 1 Remove / turn off timing position 5
Display, unlock and mode setting 2 Programming Shuttle motor S / M / L 5
Switching between 15 and 2 channels 3 Programming Shuttle click-on receiver 6
Set time and day 3 Programming external receiver 7
Set automatic timer 4 Programming tubular and BS motor 8
TECHNICAL SPECIFICATION:
● 2x Alkaline battery type AAA, LR03 ● transmit range indoor max. 30mtr
● battery life < 3 years ● working temperature -10°C - +50°C
● frequency 433.92MHz ● each channel can control up to 20 receivers
● transmit power max. 10mW
OPEN/UP
button
STOP
button P2 button (for programming
tubular motor)
CLOSE/DOWN
button
channel up/down INSERT BATTERY:
movement sensor remove the screw and
TIME button slide back cover upwards
MODE button to open remote
insert 2x AAA battery
mind the + and -
slide the back cover
downwards and fix
the screw
BATTERY EMPTY:
After changing the battery, programmed receivers will stay in memory of Diamond Sense remote.
Please follow the local regulations for disposal of the empty battery.
To Next Page
Need help?
General
