Forest DIAMOND SENSE REMOTE - Multi Receiver; Wall Switch Operation; Technical Specifications; Programming to Receiver; Canceling and Deleting Programs

02/2020 WDOC Diamond Sense www.forestgroup.com v1.4
FOREST MULTI RECEIVER / WALL SWITCH – 5201001360
TECHNICAL SPECIFICATION:
● powered by Shuttle ● op meerdere Shuttles parallel aan te sluiten
● cable 0,5mtr → 5201001360 ● working temperature 0°C - +50°C
● cable 3,5mtr → 5201001361 ● controlled by Forest remote control and
Forest wall switch RF
program button control led
open button
stop button
close button
press program button, led will blink press program button, led will blink press stop and close button for ~6 sec.
press stop button press stop button led will blink and go off
hold the remote control within 0.5mtr hold the remote control within 0.5mtr
from receiver and press OPEN button from receiver and press CLOSE button
or
or
led blinks 3 times and will go off led will blink and go off
PROGRAMMING REMOTE / WALL CANCEL ONE CHANNEL OF DELETE ALL PREVIOUS PROGRAMMED
SWITCH TO RECEIVER: REMOTE / WALL SWITCH REMOTES / WALL SWITCHES: