Need help?Do you have a question about the FORST ST8 D 55 and is the answer not in the manual?
Details the primary function and capabilities of the Först ST8D wood chipping machine.
Identifies and labels the main external parts of the chipper for user reference.
Outlines essential safety rules, personal protective equipment, and hazard avoidance for operating the chipper.
Provides a clear list of permitted and prohibited actions to ensure safe operation and prevent damage.
Presents data from noise testing and recommends hearing protection measures for operators.
Provides guidelines for safe towing, including speed limits, road conditions, and tyre pressure.
Step-by-step instructions for securely connecting and disconnecting the chipper from a towing vehicle.
Details the correct procedures for storing the chipper to ensure its condition and safety.
Step-by-step guide for starting, operating, and stopping the chipper engine and feed system.
Explains the functions of the control panel, ignition switch, and various operational modes.
Describes how to adjust the feed roller speed for optimal chipping performance.
Details the use of emergency stop buttons and bars to halt the machine rapidly.
Provides instructions on how to safely clear jams and blockages within the chipping chamber.
Lists essential daily checks for engine oil, water, screens, and fasteners.
Details checks for hydraulic oil, drive belts, blades, anvil, and hoses.
Outlines recommended maintenance tasks at various hour intervals and frequencies.
Illustrates key components like main covers, side panels, feed rollers, and engine bay.
Covers procedures for changing, sharpening, and setting chipper blades for optimal performance.
Explains the replacement procedure for the hydraulic oil filter.
Specifies recommended engine oil, hydraulic oil, anti-freeze, and grease types.
Details how to check and adjust the tension of the flywheel drive belts.
Provides safety information, storage, maintenance, charging, and jump-starting procedures for the battery.
Lists parts and provides an exploded view of the tray and stop bar assembly.
Details parts within the chipping chamber, including the flywheel and anvil.
Illustrates and lists components for the top feed roller mechanism.
Provides a parts list and diagram for the flywheel and its related components.
Shows a diagram and parts list for the bottom feed roller.
Details the parts and assembly of the anvil.
Lists parts for the stone trap mechanism.
Illustrates and lists parts for the flywheel belt tensioner.
Shows a diagram and parts list for the safety curtain.
Provides a breakdown of the chute assembly components.
Lists parts for the fuel tank assembly.
Details components of the trailer's light board.
Refers to maintenance manual for running gear, hitch, and axle checks.
Presents a schematic of the chipper's hydraulic system.
Includes diagrams for touch sensors and the wiring harness of the machine.
Explains the meaning of various safety and informational decals on the machine.
Describes the information found on the machine's statutory plate.
Explains the data presented on the Vehicle Identification Number (VIN) plate.
Outlines the terms of the manufacturer's warranty and procedures for making claims.
Presents the Certificate and Declaration of Conformity for CE Marking.
To Next Page
General
