Need help?Do you have a question about the FORST TR6 and is the answer not in the manual?
Defines the machine's function to reduce wood material and its processing capacity.
Details essential safety procedures, personal protective equipment, and hazard awareness.
Explains the correct method for lifting the machine using the designated lifting eye.
Covers the engine PLC system, control panel layout, and operating settings.
Details the functions and positions of the ignition switch for starting and stopping.
Guides on adjusting the feed roller speed using the control valve for optimal throughput.
Outlines standard and orange button emergency stop sequences and related controls.
Directs users to the engine manual for oil, filter, and fuel filter maintenance.
Lists torque specifications for various fastener sizes used on the machine.
Provides a detailed schedule of maintenance tasks based on operating hours.
Details the steps for opening and securing machine covers for maintenance access.
Step-by-step guide for safely replacing the chipper blades.
Explains how to sharpen blades, set blade gaps, and check wear limits.
Lists recommended oils, fluids, and lubricants, and their specifications.
Guides on checking and adjusting the tension of the hydraulic pump and flywheel belts.
Explains the meaning of various safety decals and hazard symbols on the machine.
General| Cutting Capacity | 150mm |
|---|---|
| Blades | 2 |
| Max Chipping Diameter | 150 mm |
| Feed Rollers | 2 |
| Feed Type | Hydraulic |
To Next Page
