1
Step 7: Install the drain hose
1 Make sure that the leveling feet are loosened before standing the dishwasher upright. They may be tight from
shipping/packaging.
2 Turn the dishwasher upright.
3 Slide a screw-type hose clamp onto the right-angled end of the drain hose.
4 Install the drain hose to the dishwasher drain outlet on the back of the dishwasher, then tighten the screw-type hose
clamp.
You’ll need:
Drain hose installation hole
Back of dishwasher
Phillips screwdriver
Screw-type
hose clamps
Drain hose
5
To Next Page
Loading...
