EasyManua.ls Logo

Fortinet FortiGate 400 - Changing Web-Based Manager Options

Fortinet FortiGate 400
308 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158 Fortinet Inc.
Changing web-based manager options System configuration
8 Specify how often the FortiGate unit should synchronize its time with the NTP server.
A typical Syn Interval would be 1440 minutes for the FortiGate unit to synchronize its
time once a day.
9 Select Apply.
Figure 1: Example date and time setting
Changing web-based manager options
On the System > Config > Options page, you can:
Set the system idle timeout.
Set the authentication timeout.
Select the language for the web-base manager.
Modify the dead gateway detection settings.
You can also restrict access to the control buttons and LCD by requiring a PIN
(Personal Identification Number).
To set the system idle timeout
1 For Idle Timeout, type a number in minutes.
2 Select Apply.
Idle Timeout controls the amount of inactive time that the web-based manager waits
before requiring the administrator to log in again.
The default idle time out is 5 minutes. The maximum idle time out is 480 minutes
(8 hours).

Table of Contents

Related product manuals