IPSec VPN IPSec VPN concentrators
FortiGate-400 Installation and Configuration Guide 229
Adding a VPN concentrator
To add a VPN concentrator configuration:
1 Go to VPN > IPSec > Concentrator.
2 Select New to add a VPN concentrator.
3 Enter the name of the new concentrator in the Concentrator Name field.
4 To add tunnels to the VPN concentrator, select a VPN tunnel from the Available
Tunnels list and select the right arrow.
5 To remove tunnels from the VPN concentrator, select the tunnel in the Members list
and select the left arrow.
6 Select OK to add the VPN concentrator.
Figure 26: Adding a VPN concentrator
To Next Page
Loading...
