Fortinet FortiGate 400 - Adding a Content Profile to a Policy

Firewall configuration Content profiles
FortiGate-400 Installation and Configuration Guide 199
Figure 16: Example content profile
Adding a content profile to a policy
You can add content profiles to policies with action set to allow or encrypt and with
Service set to ANY, HTTP, FTP, IMAP, POP3, SMTP, or a service group that includes
these services.
1 Go to Firewall > Policy.
2 Select a policy list that contains policies to which to add a content profile.
For example, to enable network protection for files downloaded by internal network
users from the web, select an internal to external policy list.
3 Select New to add a new policy, or choose a policy and select Edit .
4 Select Anti-Virus & Web filter.
5 Select a content profile.
6 Configure the remaining policy settings if required.
7 Select OK.
8 Repeat this procedure for any policies for which to enable network protection.