Fortinet FortiGate FortiGate-100A - Factory Default Transparent Mode Network Configuration

Factory defaults Factory default Transparent mode network configuration
FortiGate-60 series and FortiGate-100A FortiOS 3.0 MR4 Install Guide
01-30004-0266-20070831 25
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration
listed in Tab l e 4.
Modem interface
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access:
ADSL Modem interface
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access:
IP: 10.10.80.1
WLAN
Netmask: 255.255.255.0
Administrative Access: Ping
Network Settings
Default Gateway (for default route) 192.168.100.1
Interface connected to external
network (for default route)
external
Default Route
A default route consists of a default gateway and the
name of the interface connected to the external network
(usually the Internet). The default gateway directs all non-
local traffic to this interface and to the external network.
Primary DNS Server 65.39.139.53
Secondary DNS Server 65.39.139.63
Table 3: Factory default NAT/Route mode network configuration (Continued)
Table 4: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 0.0.0.0
Netmask: 0.0.0.0
DNS
Primary DNS Server: 65.39.139.53
Secondary DNS Server: 65.39.139.63
Administrative access
Internal HTTPS, Ping
DMZ HTTPS, Ping
DMZ1 HTTPS, Ping
DMZ2 Ping
WAN1 Ping
WAN2 Ping
WLAN Ping