Fortinet FortiGate FortiGate-100A Install Guide

FortiGate-60 series and FortiGate-100A FortiOS 3.0 MR4 Install Guide
72 01-30004-0266-20070831
Wireless operation modes Using a wireless network
Figure 14: FortiWiFi in Access Point mode
Client mode
When using the FortiWiFi-60 in Client mode, the device is set to receive
transmissions from another access point. This enables you to connect remote
users to an existing network using wireless protocols from a location that does not
have a wired infrastructure.
For example, in a warehouse where shipping and receiving are on opposite sides
of the building, running cables is not an option due to the warehouse environment.
The FortiWiFi-60 unit can support wired users using its four Ethernet ports and
can connect to another Access Point wirelessly as a Client. This connects the
wired users to the network using the 802.11 wireless standard as a backbone.
Figure 15: FortiWiFi-60/60M in Client mode
DMZ
network
Internal
network
Internet
MODEM / DSL / Cable
Wireless network
Router
Internal
DMZ
WAN2
WAN1
Internet
MODEM / DSL / Cable
Wireless network
Internal
network
Internal
network
Router
DMZ network
Web Server
Mail Server
Hub or switch
Internal
DMZ
WAN1
WAN2

Fortinet FortiGate FortiGate-100A Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-100A
Category	Firewall
Language	English