Fortinet FortiSIEM 2000G - Page 10

Appliance Setup
Option Description
IPv6 Address The Manager/Supervisor/Worker/Collector's IPv6
address
prefix
(Netmask)
The Manager/Supervisor/Worker/Collector's IPv6
prefix
Gateway ipv6 IPv6 Network gateway address
DNS1 IPv6,
DNS2 IPv6
Addresses of the IPv6 DNS server 1 and DNS
server2
Note: If you chose option 3 in step 9 for both IPv4 and IPv6, then even if you configure 2 DNS servers for IPv4 and
IPv6, the system will only use the first DNS server from IPv4 and the first DNS server from the IPv6 configuration.
Note: In many dual stack networks, IPv4 DNS server(s) can resolve names to both IPv4 and IPv6. In such
environments, if you do not have an IPv6 DNS server, then you can use public IPv6 DNS servers or use IPv4-
mapped IPv6 address.
13. Configure Hostname for FortiSIEMManager/Supervisor/Worker/Collector. Press Next.
Note: FQDN is no longer needed.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 10
Fortinet Inc.