1010 11
Setup Options
Set up your device locally using the GUI or CLI. Choose an option to
complete your setup, then configure your device.
Local Setup
Command Line Interface (CLI)
An alternate configuration tool from the web-based manager that
uses a terminal emulation application to type commands or upload
batches of commands from a text file or configuration script.
GUI
Local Setup
An easy-to-use GUI, compatible with most web browsers.
A
B
Ethernet Cable
1. Connect a FortiWeb Port 1 to the Management Computer using the
supplied Ethernet cable
2. Enable DHCP or set the Management Computer’s IP and subnet to:
Static IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
3. Visit 192.168.1.99 in a web browser
4. Log in with the username admin and no password
5. You can now configure your device
Management Computer
FortiWeb Port 1
Browse to 192.168.1.99
Username: admin
No Password
GUI
A
Setup
To Next Page
Loading...
Need help?
General