Fortis FSEFBTM520A - Page 13

Heart Rate Function
• Hold the steel sensor plates on the handlebars. Use natural grip on both handles.
• After about 5 seconds, the LED pulse display window will display a heartbeat initial
value. Keep your hands still on the sensors for roughly 30 seconds to get an
accurate heart rate measurement.
• The heart rate data will change in real-time if your hands are placed on the
sensors.
Sleep Function
• When the treadmill stops running and there is no operation for more than 10
minutes, the sleep mode will be activated. The display is turned off automatically.
• Press any key to wake it up.
Safety Tether and Safety Lock
• Before operating the treadmill, ensure the safety tether is placed in the specified
location.
• If the safety tether is missing or not correctly connected the control console will
display E07 or "---" with a warning note.
• If the safety tether is removed when operating the treadmill, the system will quickly
shut down and the safety lock is activated. The data in the display will be cleared.
USB Functions
• Insert a USB device containing audio files in the MP3 format while the treadmill is
powered off.
• Audio will automatically play from the inserted USB device.
Display Parameters Range
Initial
Program Initial Value
Setting Range
Display Range
Time (Min: Sec)
0:00
30:00
8:00 - 99:00
0:00 ~ 99:59
Speed (Km/h)
0.0
1
1-18
1 - 18
Distance (Km)
0.00
1.00
1.O - 99.0
0.0 - 99.9
Pulse (Times/Min)
P
N/A
N/A
40 - 199
Calories (Kcal)
0.0
50.0
20 - 990
0 - 999
Incline (Level)
0
0
0 - 15
0 - 15
Note: This heart rate test data is not medically accurate and should be used for
sporting purposes only.