Fortress Technologies FDH2813 User Manual

Unit operates at “FUZZY” mode or low level according to the actual humidity
environment. The unit operates at “FUZZY” mode when humidity is over 55%.
Compressor will turn on aer the “ON/OFF” buon is pressed in 3 minutes (Compressor
starts once the plug plugged in the socket aer 3 minutes). If the humidity is less
than 50%, unit will turn to operate in air clean mode and the compressor is off.
2. Unit operates connuously at ”LO” speed at low noise level with compressor
turns on unl water tank full or Power buon is pressed for off when the
humidity is more than 60%. Once the humidity is less than 55%, unit will turn to
operate at Air Clea
n mode. LCD shows as below:
3. Unit operates connuously at ”HI” speed with compressor turns on unl water
tank full or Power buon is pressed for off when the humidity is more than 45%.
Once the humidity is less than 40%, unit will turn to operate at Air Clean mode.
LCD shows as below:
4. Select “Air Clean” mode, unit operates at low fan speed and compressor turns off.
LCD shows as below:
5. Select “CONT” mode, unit operates connuously at high speed with compressor
turns on unl water tank is full or Power buon is pressed for off. LCD shows as
below:
4.
MODE
High
Medium
Low
MODE
High
Medium
Low
MODE
High
Medium
Low
MODE
High
Medium
Low

Fortress Technologies FDH2813 Specifications

General

Model No.	FDH2813
At 30 ℃ 80%RH: Dehumidifying Capacity Power Consumption	28L/day 375W
At 26.7 ℃ 60%RH: Dehumidifying Capacity Power Consumption	12.5L/day 315W
Water Tank Capacity	6.5 liters
Power Supply	220V-240V~; 50Hz
Temp. range for use	5oC – 35oC

Weight and Dimensions

Net Weight	14kg
Dimension (W x D x H)mm	380 x 287 x 595