Fortress Technologies FJW70A11P - Installation of the Washing Machine; Unpacking and Initial Setup; Drain Hose Connection; Water Inlet Hose Connection

Remove package
!
!
!
Remove the package. Take out the washing machine
and place it on the protective foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the protective foam base
is strictly forbidden.
Base foamed cushion
5
Installation of water inlet hose
6
Installation of the washing machine Installation of the washing machine
Installation of drain hose
!
!
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
at