Fortress Technologies FJW70M17 User Manual (English)

Questions and Answers:

J
jennifer74Aug 13, 2025
How to fix a Fortress Technologies Washer when no water flows in?
- B
  Brandon WardAug 13, 2025
  If your Fortress Technologies Washer isn't filling with water, a few things could be happening. First, ensure that the power is on and the fuse hasn't blown. Next, check that the water supply hasn't been cut off or that the water pressure isn't too low. Also, verify that the inlet hose is correctly connected and the water tap is fully opened. The filtering screen of the inlet valve might be blocked by dirt, or the coil of the inlet valve could be damaged. Lastly, make sure you've pressed the "Start / Pause" button after pressing the power button.
S
Sabrina HarrisAug 17, 2025
What to do if Fortress Technologies FJW70M17 alarms for lid not closed?
- J
  Jennifer ScottAug 17, 2025
  If your Fortress Technologies Washer is giving an alarm because the lid isn't closed, simply ensure that the door is fully closed.
S
Steven MillerAug 21, 2025
What to do if Fortress Technologies FJW70M17 alarms because water drain has not finished?
- A
  Angie KerrAug 21, 2025
  If your Fortress Technologies Washer is alarming because the water drain hasn't finished, you should: 1. Check that the water drain hose is placed correctly and clean the stem. 2. Check the water level sensor and the drain pump.
L
Leah MillerAug 25, 2025
Why is my Fortress Technologies FJW70M17 Washer spinning abnormally?
- W
  williamvelasquezAug 25, 2025
  If your Fortress Technologies Washer is not spinning correctly, make sure the door lid is completely closed. Also, check if clothing is piled largely on one side of the barrel or if you've placed excessive clothing in the washer. Finally, ensure the washer is placed on a stable, level surface.
G
Gabriella LongAug 28, 2025
What to do if Fortress Technologies Washer alarms for abnormal water in taking?
- S
  sonia09Aug 28, 2025
  If your Fortress Technologies Washer is alarming for abnormal water intake, first, ensure that the water tap is open. If it is, the water pressure might be low, so try to increase the inlet water amount.
J
Jennifer GreerSep 1, 2025
Why is my Fortress Technologies FJW70M17 Washer not washing?
- H
  heathedwardSep 1, 2025
  If your Fortress Technologies Washer is not washing, ensure that the power is on. Also, verify that the water amount reaches the required water level. Finally, check if the washer is set to the "TIME DELAY" washing mode.
J
John LittleSep 5, 2025
What to do if Fortress Technologies FJW70M17 Washer is draining abnormally?
- A
  Alan Rodgers DVMSep 5, 2025
  If your Fortress Technologies Washer is draining abnormally, ensure that the water drain hose is not placed too high. Also, check that the end of the water drain hose is not sealed in a pond. Lastly, the internal rubber ring of the drain valve could be blocked by dirt.
S
smithpatrickSep 8, 2025
How to fix Fortress Technologies Washer alarm for laundry staying on one side?
- T
  theresa18Sep 8, 2025
  If your Fortress Technologies Washer is alarming because the laundry is staying on one side, try to place the clothes evenly inside the washer.

Fortress Technologies FJW70M17 Specifications

General

Brand	Fortress Technologies
Model	FJW70M17
Category	Washer
Language	English

Summary

Safety Instructions

Installation Instructions

Installation Area

Details requirements for washer placement, including stability and space.

Remove Package

Instructions on unpacking the washer and checking accessories.

Installation of the Drain Hose

Guidance on connecting the drain hose, emphasizing use of new parts.

Installation of the Water Inlet Hose

Steps for connecting the water inlet hose to the tap and valve.

Parts Description

Operation Instruction

Control Panel

Overview of the washer's control panel and its buttons.

Program Selection

Details on selecting various washing programs and their functions.

Start / Pause

Instructions for starting, pausing, and resuming wash cycles.

Power Supply

How to turn the appliance on and off using the power button.

Rinse Level Selection

Guidance on choosing the appropriate water level for rinsing.

Time Delay

Information on setting a delayed start for washing programs.

Wash Rinse Spin

Explanation of buttons controlling wash, rinse, and spin phases.

Drum Clean

Instructions for activating the drum cleaning program.

Quick Start

Program Selection

Steps for initiating a wash program.

The Washer Stops

Information on how the washer stops and post-operation actions.

Programs List

ONE TOUCH SMART WASH

Details on the automatic fuzzy detection washing program.

NORMAL

Description of the basic washing program for cotton fabrics.

DELICATE

Program for washing delicate clothing items.

ANTI-CREASING

Program designed to wash clothes and prevent wrinkling.

AIR DRY

Program for air drying laundries and the inner tub.

INTENSIVE

Program for washing dirtier clothes with stronger water flow.

SOAK

Program involving a pre-soaking period for better cleaning.

QUICK

Program for washing clothes that are not too dirty in a shorter time.

DRUM DRY

Program to clear water from the barrel and minimize mildew.

DRUM CLEAN

Program for cleaning the inside of the washing barrel.

RINSE HOLD

Program where the washer does not spin after the last rinse.

Instruction to Self-Programmed Procedure

Instruction to Single/Combine Wash Procedure

ONE TOUCH SMART WASH

Procedure for initiating the one-touch smart wash cycle.

WASH

Procedure for performing only the wash cycle.

SPIN

Procedure for performing only the spin cycle.

WASH + RINSE + SPIN

Procedure for a combined wash, rinse, and spin cycle.

Maintenance Instruction

Cleaning of Water Inlet Hose Joint

Steps to clean the filtering screen of the water inlet valve.

Cleaning of Lint Filter

Instructions for cleaning the lint filter of the washer.

Cleaning the Drain Pump Filter

Detailed steps for cleaning the drain pump filter, with warnings.

Troubleshooting

Faults and Inspection Items

Common washer faults and their potential causes and checks.

Error Codes

Explanation of error codes displayed on the panel and their solutions.

Following phenomena are not faults of washer

Water leakage from drain hose

Explanation for water leakage from the drain hose on first use.

Make up water during washing

Reason for automatic water replenishment during wash cycles.

Spin stops and water filling starts

Cause for spin interruption and subsequent water filling.

Clothes not sufficiently dry

Reason why clothes may not be dry enough after spinning.

Specification

Warranty

Warranty Period

Details the 3-year warranty period from the date of purchase.

Warranty Exclusions

Conditions under which the warranty does not apply.

Service Requirements

Customer requirements for obtaining warranty services.

Contact Information

Fortress Service Centre contact hotline number.

Notes

Important notes regarding power usage and appliance safety.

Environment

Instructions for environmentally responsible disposal of the appliance.

Important Notices

Disclaimers on company liability for damages and product use.

Related product manuals

Fortress Technologies FJW70A11P

11 pages

Fortress Technologies FJW50M15

14 pages

Fortress Technologies FW816B515

24 pages

Fortress Technologies FW1016B613

24 pages

Fortress Technologies FFW812C11E

35 pages

FFW1212C11E

35 pages

Fortress Technologies FJW70M17 User Manual

Table of Contents

Questions and Answers:

Fortress Technologies FJW70M17 Specifications

Summary

Safety Instructions

Installation Instructions

Installation Area

Remove Package

Installation of the Drain Hose

Installation of the Water Inlet Hose

Parts Description

Operation Instruction

Control Panel

Program Selection

Start / Pause

Power Supply

Rinse Level Selection

Time Delay

Wash Rinse Spin

Drum Clean

Quick Start

Program Selection

The Washer Stops

Programs List

ONE TOUCH SMART WASH

NORMAL

DELICATE

ANTI-CREASING

AIR DRY

INTENSIVE

SOAK

QUICK

DRUM DRY

DRUM CLEAN

RINSE HOLD

Instruction to Self-Programmed Procedure

Instruction to Single/Combine Wash Procedure

ONE TOUCH SMART WASH

WASH

SPIN

WASH + RINSE + SPIN

Maintenance Instruction

Cleaning of Water Inlet Hose Joint

Cleaning of Lint Filter

Cleaning the Drain Pump Filter

Troubleshooting

Faults and Inspection Items

Error Codes

Following phenomena are not faults of washer

Water leakage from drain hose

Make up water during washing

Spin stops and water filling starts

Clothes not sufficiently dry

Specification

Warranty

Warranty Period

Warranty Exclusions

Service Requirements

Contact Information

Notes

Environment

Important Notices

Related product manuals