11
Following phenomena are not faults of washer
Water leakage from the water
drain hose when use for the
first time.
This is residue water after the performance test in the factory.
Make up water during
washing process.
During the washing process, the water will be automatically
made up when the water level declined.
During the dehydrating
process, spin suddenly stops
and water filling and rinsing
start running.
This is because the clothes are piled at one side. The safety
switch will start to work to make up water, rabble while
running. The spinning process will be continued when the
clothes is in balance status. In case of failure of three
corrections of the machine, the buzzer will alarm. Please
manually adjust the balance of the clothes.
The clothes are not
sufficiently dry after the
spinning process.
The heavy and thick part of the clothes will cause uneven
spin.
Degree of protection of moisture
To Next Page
Loading...
