Fortress Technologies FJW70M17 - Quick Start; Program Selection; The Washer Stops

6
Quick Start
Program Selection
1. Press the “Power” button
2. Select the proper rinse level or other attached functions.
3. Press the “Start / Pause” button.
The Washer Stops
• When the washer stops, the buzzer will buzz continuously for 6 times and then the power will be
automatically cut off.
• Turn off the water tap.
• Although the power can be cut off automatically, the power plug must be pulled out as well for
safety.
10. Press the “Start/ Pause” button
9. Select desired program
8. Press the “Power” button
3. Put in suitable amount of
washing power or detergent
2. Load the laundry
4. Close the washer door
5. Hang up the drain pipe
6. Turn on the water tape
7. Plug in the power supply
1. Install the washer