8
Instruction to Self-Programmed Procedure
Users can select any combination among programs, rinse level, wash time, rinse time, spin time &
time delay according to the need.
電源 開始/暫停
Power Program Rinse Level Wash Rinse Spin Time Delay Start/Pause
Instruction to Single/Combine Wash Procedure
Users can select single process or combinations of wash, rinse and spin according to the need. Detail
operations as follows:
ONE TOUCH SMART WASH
電源 開始/暫停
Power Start/Pause
WASH
電源 開始/暫停
Power Wash Start/Pause
SPIN
電源 開始/暫停
Power Spin Start/Pause
WASH + RINSE + SPIN
電源 開始/暫停
Power Wash Rinse Spin Start/Pause
Note
• If there is any power supply break during operation, the appliance with memorize the selected
program.
• When the power resume, press the “Start/Pause” button to resume the program.
• Close the lid when machine is running. Otherwise, it will automatically stop working during the
process and send out abnormal warning.
• The washer will not work when the filled water does not reach the set water level.
• After pressing the ”Power” button, if the “Start/Pause” button is not press, the power will be
automatically cut off after 10 minutes.
To Next Page
Loading...
Need help?
General
