Before washing, please take out coins,
keys and other hard items, and zip up clothes
to prevent washing items and barrel from
damage.
7
Accessories
8
Preparation before washing Parts identification of the washing machine
！
！
NOTICE
Adjust the adjustable foot to place
the washer stably.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously rough and uneven, correction should be
made on the ground surface, otherwise the
washer barrel will incline and knock the cabinet)
Install the water
inlet hose.
2
+
+
single inlet hose
Connect with
power source.
3
4
Turn on the
water tap.
+
+
Put down the drain
house.
5
Gravity drain
Upper drain
Note:
The water
will overflow
when the
height of
the drain
hose under
750mm.
>750mm
Put in
clothes
and
suitable
amount of
washing
powder.
6
Inlet hose Upper drain hose
Water inlet valve
Filtering bag
Bleacher inlet
Control panel
Handle of lid
Handle
Power cord
Adjustable
foot knob
Cabinet
Impeller
(Back of lid)
Upper drain hose
To Next Page
Loading...
Need help?
General
