EasyManuals Logo

Fortress Technologies FW1215C718 User Manual

Fortress Technologies FW1215C718
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
13. Curtain
Use this programme to wash tulles and curtains. Thanks to the special spin profile of the programme, tulles and
curtains crease lesser.
As their meshed texture causes excessive foaming, wash the veils/tulle by putting little amount of detergent into
the main wash compartment. Do not put detergent in the prewash compartment.
It is recommended to use special detergents produced for curtains in this programme.
Special programmes
14. Rinse
Use this programme when want to rinse or starch separately.
15. Spin+Drain
Use this programme to apply an additional spin cycle for the laundry or to drain the water in the wahser. Before
selecting this programme, select the desired spin speed and press Start / Pause button. The washer will
spin
the laundry with the set spin speed and drain the water coming out of them.
If wish to drain only the water without spinning the laundry, select the Spin+Drain programme and then select
the No Spin function by Spin button. Press Start / Pause button.
Temperature selection
Whenever a new programme is selected, the maximum temperature for the selected programme will appear on
the temperature indicator.
To decrease the temperature, press
the Temperature Adjustment button. Temperature will decrease gradually.
If the programme has not reached the heating step, you can change the temperature without switching
the machine to Pause mode.
Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme will be
displayed on the spin speed indicator. To decrease the spin speed, press the Spin button. Spin speed decreases
gradually. Depending on the model of the appliance, "Rinse Hold" and "No Spin" options will appear on the
display. See "Auxiliary function selection" section for explanations of these options.
If the programme has not reached the spinning step, you can change the speed without switching the
machine to Pause mode.
Use a lower spin speed for delicate laundrues.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fortress Technologies FW1215C718 and is the answer not in the manual?

Fortress Technologies FW1215C718 Specifications

General IconGeneral
BrandFortress Technologies
ModelFW1215C718
CategoryWasher
LanguageEnglish

Related product manuals