Fortress Technologies FW1215C718 - Correct Load Capacity; Loading the Laundry; Using Detergent and Softener

6
Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme
desired. The appliance automatically adjusts the amount of water according to the weight of the loaded laundry.
Warning: Refer to “Programme table”. When overloaded, machine's washing performance will drop.
Moreover, noise and vibration problems may occur.
Laundry type
Weight (g)
Bathrobe
1200
Napkin
100
Duvet cover
700
Bed Sheet
500
Pillowcase
200
Tablecloth
250
Towel
200
Hand towel
100
Evening gown
200
Underclothing
100
Men’s overalls
600
Men’s shirt
200
Men’s pajamas
500
Blouses
100
Loading the laundry
1. Open the loading door.
2. Place laundry items loosely into the washer.
3. Push the loading door to close until hear a locking sound. Ensure that no items are caught in the door.
The loading door is locked while the programme is running. The door can only be opened few minutes
after the programme comes to an end.
Warning: In case of misplacing the laundry, noise and vibration problems may occur in the appliance.
Using detergent and softener
When using detergent, softener, bleach or limescale remover, read the manufacturer's instructions on
the package carefully and follow the suggested dosage values. Use a measuring cup if available.
Detergent Drawer
The detergent drawer is composed of three compartments:
1. Compartment 1 for prewash
2. Compartment 2 for main wash
3. Compartment 3 for softener
* There is siphon piece in the softener compartment.