Foscam FI9903P - Surveillance Software Interface; Login Window Explained

14
be using the TP-LINK brand wireless router as an example.
 If there is a UPnP function in your router:
Choose Forwarding > UPnP, make sure that the Current UPnP Status is Enabled.
 If there is no UPnP function in your router:
You need to manually add port (HTTPS port) forwarding, refer to the following steps. You need go to the
Forwarding > Virtual Servers panel for setup.
Click Add New.
Input the port and IP address of
your camera and click Save.