Foscam FI9903P - Video Stream Settings

49
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click OK to apply changes.
Step 3: Wait around 10 seconds, you'll see that the camera's LAN IP address has changed. In our example it
was changed to 2000, so we see http://192.168.1.105:2000 in Equipment Search Tool. Also, the LAN IP
address is now fixed at a static IP address of http://192.168.1.105:2000. This IP address will not change even if
the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important
that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera
remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!
Figure 4.1
NOTE: If the camera cannot be accessed, please make sure the port forwarding is succeed.
Modify the Http Port .
Enter the Username and
password, click OK.
Select which camera
you’d like to change the
port for, and right click .