Need help?Do you have a question about the Foss Soxtec 1047 and is the answer not in the manual?
General| Model | Soxtec 1047 |
|---|---|
| Technique | Soxhlet extraction |
| Number of positions | 6 |
| Number of Extraction Units | 1 |
| Extraction Capacity | Up to 6 samples simultaneously |
| Solvent Recovery | Yes |
| Application | Fat extraction |
| Extraction Method | Solvent extraction |
| Heating method | Electrical |
| Heating System | Integrated heating |
| Cooling Requirement | Water cooling |
| Power Supply | 220-240V, 50/60Hz |
Defines the primary purpose of the 1047 Hydrolyzing Unit in laboratory analysis.
General guidelines for safe operation, handling solutions, and electrical safety.
Lists key specifications such as sample size, measuring range, and capacity per batch.
Instructions for unpacking the unit and verifying all included accessories.
Specifies power supply, dimensions, weight, water supply, and ventilation needs.
Details the type and rating of fuses required for the unit's operation.
Step-by-step guidance for connecting the unit to power and water.
Instructions for homogenizing samples to achieve optimal results before treatment.
Step-by-step instructions for replacing the vacuum valve on the unit.
Guide on how to safely replace the condenser unit.
Instructions for replacing the upper filter seal.
Details safety aspects concerning the unit's reinforced electrical insulation.
Specifies the operating environment conditions like altitude, temperature, and humidity.
Provides guidance on how to safely lift and move the instrument.
Lists various accessories available for the Soxtec system.
Lists essential spare parts for the unit with their order numbers.
Provides contact information for Foss Tecator AB.
Defines the primary purpose of the 1047 Hydrolyzing Unit in laboratory analysis.
General guidelines for safe operation, handling solutions, and electrical safety.
Warns about electrical shock hazard and requirement for grounded receptacles.
Explains equipotentiality and warns about hot surfaces on the unit.
Instructions for homogenizing samples to achieve optimal results before treatment.
Details safety aspects concerning the unit's reinforced electrical insulation.
Specifies the operating environment conditions like altitude, temperature, and humidity.
Provides guidance on how to safely lift and move the instrument.
To Next Page
