EasyManua.ls Logo

FOSSIBOT F800 - Car Charging Procedure; Charging via Car Lighter

FOSSIBOT F800
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Car Charging
This product can be charged by the cigarette lighter in the car with an ACC cable
(accessory: ACC hereinafter).
Turn on the power of this product, connect the ACC charging cable to the cigarette
lighter in the car and the XT60 interface on the side of the product, turn on the engine
of the car, and the LCD of this product will show the input power.
On-board charging should be carried out with the car engine turned on. If the engine is not
turned on, the battery might run out.
Car charging is usually low power of 90-120W, and the charging time will be long. If you need
quick charge, it is recommended to use the mains.

Related product manuals