19G3 Cabinets - Service Manual
Condenser Cleaning
The condenser is a Stayclear condenser which does not require cleaning as regularly as a traditional nned condenser may. Care should be taken
when cleaning the condenser. Never use a wire brush, abrasive or corrosive materials to clean the condenser.
Door Gaskets
Door gaskets should be inspected periodically and cleaned where necessary with a warm damp cloth. Do not use aggressive cleaning materials on
the door gaskets.
Where door gaskets are damaged or not sealing correctly, they are required to be changed. These can be removed by pulling the old gasket from
it’s locating prole and pushing the new gasket into the same location. Where the gasket will not locate securely in the locating prole use a
rubber mallet to locate the gasket securely.
Maintenance
3
To Next Page
Loading...
