Foster oven - Operating the Oven; Selecting Cooking Functions and Starting

HOW TO SELECT A COOKING FUNCTION
Press one of the two direction keys:
(7) to select the desired cooking cycle.
See function explanation in the table above (cooking cycles available).
N.B. If no selection is made within 5 minutes, the oven will turn off automatically.
See section oven off mode .
HOW TO CHANGE THE COOKING CHAMBER TEMPERATURE
Press one of the two keys
(1) to change, with steps of +/-5°C, the preset temperature.
The cooking chamber temperature is always displayed on the left side of the letter
t.
N.B. The degree symbol “°” flashes during the oven preheating period until the set temperature is
achieved. Otherwise, it is always on in all the other cases, such as for example: temperature control, when
the oven is maintaining the temperature already achieved, and cooling, when the oven must reach a set
temperature lower than the starting value.
HOW TO START THE COOKING
The activation of the selected cooking function, with the settings shown on the display, occurs when
the selection is confirmed with key
(8).
The following message appears on the display: ACTIVATE CYCLEMENU
N.B. The oven turns off automatically after 5 minutes if the start of the cooking process is not
confirmed.
The phrase “COOKING IN PROGRESS MENU” will appear on the display when the cooking
is activated.
Pressing the key
(9) accesses a menu which allows the user to perform semiautomatic cooking
settings or store the data of the cooking in progress. See section
41