Foster oven - Cooking Time and Program Management

HOW TO CANCEL A COOKING TIME
Press the keys
(3) simultaneously to cancel the time previously programmed for this
function.
The cooking time is set to zero.
HOW TO PROGRAM THE START AND STOP OF THE OVEN
Turn on the oven, select a cooking function and set the desired cooking temperature.
Use the keys
(3) to set the cooking time.
The maximum time that can be set is 10 hours.
Then press the key:
(9), select the item END OF COOKING with key (8).
When the message SET TIME appears, use the keys
(3) to
set the END OF COOKING time, within the next 23 hours 59 minutes.
Confirm the setting with the key
(8).
The oven will go into delayed start mode. It will be automatically activated later for a set duration
and will stop at the programmed end of cooking time.
A clear message: “OVEN TO BE TURNED ON IN .. ..”
at 15 sec. intervals will be displayed to show the time remaining before the oven is turned on.
It is possible, however, to recall the information on the display at any time by pressing one of the
two keys
(3)
HOW TO CANCEL AN OVEN START/STOP PROGRAM
Press the keys
(3) simultaneously to cancel the oven start/stop program.
The oven will automatically activate and display the message: COOKING IN PROGRESS
MENU
COOKING FINISHED MODE
The oven turns off all the heating elements.
The display shows the message: “COOKING FINISHED” accompanied by a buzzer signal.
The buzzer signal can be turned off by pressing any key.
Press the key
to turn off the oven or press one of the two keys (7) to select a new
cooking cycle.
43