Fostex G16S - Fostex G24 S;G16 S Specifications and Service Data

1. SPECIFICATIONS / SERVICE DATA
TAPE
1 inch (25.4mm) tape width, 2.0mil (50jum) base G24S
1/2 inch (12.7mm) tape width, 2.0mil (50jum) base G16S
TRACK FORMAT 24 track, 24 channel G24S
16 track, 16 channel G16S
HEAD Erase 24 track, 24 channel G24S
16 track, 16 channel G16S
Record/playback 24 track, 24 channel G24S
16 track, 16 channel G16S
MOTOR
Capstan motor 1 pc. DC print motor
Reel motor 2 pcs. DC motor
Loading motor 1 pc. DC motor
REEL SIZE
Up to 10-1/2 inch (27cm), NAB or EIA/CINE
TAPE SPEED
15 ips (38cm/sec) ±0.2%
PITCH CONTROL
More than ± 12%
LINE INPUT
- lOdBV (0.3V), impedance: 30kil, unbalanced
LINE OUT
-1 OdBV (0.3 V), load impedance: 1 0kf2 or higher,
unbalanced
NOISE REDUCTION
DOLBY S NR (ON/OFF/Track 24 only OFF switchable)
G24S
DOLBY S NR (ON/OFF/Track 16 only OFF switchable)
G16S
EQUALIZATION
15 ips (38cm/sec): 00 + 35/z sec
RECORD LEVEL CALIBRATION
OdB referenced to 320nWb/m of tape flux
WOW AND FLUTTER
±0.05% peak WTD (IEC/ANSI), ±0.10% UNWTD for 15 ips,
measured with flutter test tape, STL X-1453 (3,150 Hz) G24S
Fostex 9101 (3,000 Hz) G16S
1