To Next PageTo Next Page
Need help?Do you have a question about the Fostex VF-16 and is the answer not in the manual?
Inputs and Outputs| phone jack inputs (unbalanced) | 8x ø6mm |
|---|---|
| XLR type inputs (balanced) | 2x XLR-3-31 |
| TRS phone jack insert | ø6mm |
| AUX send phone jack | ø6mm TRS |
| Stereo Out RCA pin jack | 2 x RCA |
| Monitor Out phone jack | 2x ø6mm |
| Headphone Out stereo phone jack | 1x ø6mm |
| Digital In/Out Optical | 2 x Optical |
| MIDI In/Out/Thru | 2 x DIN 5 pin |
| Punch In/Out phone jack | 1x ø6mm |
| SCSI | 1x D-SUB 50-pin |
Impedance and Levels| Input Impedance (A – H) | >50k ohms |
|---|---|
| Rated Input Level (A – H) | -50dBV - +2dBV |
| Input Impedance (G/H) | >1k ohms |
| Load Impedance (Insert) | >10k ohms |
| Rated Output Level (Insert) | -10dBV |
| Load Impedance (AUX send) | >10k ohms |
| Rated Output Level (AUX send) | -10dBV |
| Load Impedance (Stereo Out) | >10k ohms |
| Rated Output Level (Stereo Out) | -10dBV |
| Load Impedance (Monitor Out) | >10k ohms |
| Rated Output Level (Monitor Out) | -10dBV |
| Load Impedance (Headphone Out) | >16 ohms |
| Maximum Output (Headphone Out) | 20mW (at 50 ohms) |
Power and Processing| phantom power | +48V |
|---|---|
| Sampling Frequency | 44.1kHz |
| Quantization | 16bit linear |
| Pitch control | ±6% (0.01% step) |
| Dynamic Range | 92dB |
| T.H.D. | 0.01% (typical) |
| Crosstalk | > 60dB @ 1kHz |
| D/A converter | 24bit Delta-Sigma 128x over sampling |
| Power Consumption | 120V / 230V15W |
Physical Characteristics| Weight | approx. 4.0kg |
|---|
Covers essential safety warnings and precautions for using the VF-16 to prevent electric shock and hazards.
Details on power connection, handling liquids, ventilation, grounding, and servicing the unit.
Overview of the VF-16 Digital Multitracker and its capabilities.
Key features including the digital mixer, DSP multi-effects, and 16-track recorder.
Identification and description of controls and connections on the top panel.
Identification and description of connections and controls on the rear panel.
Step-by-step guide on how to reformat the VF-16's hard disk drive.
Procedures and precautions for replacing the internal hard disk drive.
Diagrams and instructions for connecting external audio sources and devices.
Explanation of the LCD display modes and switching time bases (ABS, BAR/BEAT/CLK, MTC).
Step-by-step guide to record a sound source to a single track.
Procedure for recording a stereo sound source to two tracks.
Instructions on how to save locate points to memory keys.
Details on using ABS Locate for finding points in the program.
Using the unit's keys for manual punch in/out recording.
Setting punch points automatically for punch in/out recording.
Procedure for interchanging tracks to optimize usage.
Adjusting levels, PAN, EQ, and effects for mixed tracks.
How to adjust the pan position for each channel.
Guide to adjusting the 3-band equalizer for each channel.
Adjusting send levels for effects and AUX.
Description of the VF-16's startup display and initial state.
How to operate the unit when the Normal display is shown.
Adjusting the send levels for the internal effect processors.
Choosing between pre-fader or post-fader for effect and AUX sends.
Adjusting channel and master fader levels numerically.
Applying the built-in compressor to selected channels.
Overview of the VF-16's reverb, delay, chorus, and flanger effects.
Guide to adjusting effect parameters for selected types.
How to mute effect sound for effect 1 or 2.
Procedure for saving current settings to a scene memory.
Procedure for recalling stored scene memories.
Methods for creating event memories for scene event maps.
Procedure for deleting unnecessary scene memories.
Using F FWD/REWIND, SCRUB, and Shuttle Cueing for locating sounds.
Adjusting playback and recording speed in small increments.
Automating playback start and track return functions.
Storing specific points for auto functions.
Steps to create a new program and assign a title.
How to select, erase, and edit program titles.
Procedures for copying, moving, and pasting track data.
Steps for erasing track data and exchanging tracks.
How to undo and redo paste operations.
Steps for erasing sections of tracks or entire tracks.
How to undo and redo erase operations.
Examples of using DIRECT RECORD for recording.
Examples of using BUSS RECORD for mixing and ping-pong.
Configuring the tempo map for metronome sound.
How to check and monitor the metronome sound output.
Recording from external digital sources like S/P DIF or ADAT.
Choosing tracks for digital recording.
Connecting MIDI sequencers and computers to the VF-16.
Configuring VF-16 settings for MIDI clock synchronization.
Overview of saving/loading data via S/PDIF, ADAT, and SCSI.
Procedures for saving/loading data using digital connections.
Connecting the VF-16 to external SCSI devices.
Steps to format a backup disk for SCSI use.
Guidelines for using WAV files and backup disk requirements.
Procedure for loading WAV files from SCSI or computer.
Configuration of operating environment and parameters.
Checking event numbers and drive information.
Executing operations like Save/Load and Disk Format.
Procedure to insert new time signatures into the tempo map.
How to clear all signature and tempo settings.
Procedure to register new tempo settings in the tempo map.
How to erase registered tempo settings.
Selecting MIDI sync signal output type (CLK, MTC, Off).
Setting the preroll time before a locate point.
Setting the frame rate for MTC output.
Specifying an offset time value for MTC output.
Determining MTC output position (ABS or BAR/BEAT).
Enabling or disabling the VF-16 slave mode.
Choosing the external sync signal type for slave mode.
Enabling/disabling record protection.
Setting whether tracks use digital or analog input signals.
Setting the type of digital signal output (SPDIF or ADAT).
Turning BAR/BEAT resolution mode on or off.
Setting the VF-16 device ID for MMC control.
Checking the total number of audio files per track.
Switching between E-IDE and SCSI drives.
Checking current drive format details.
Setting whether fader manipulation affects sound volume.
Setting if fader positions are recalled during scene recall.
Setting phantom power for INPUT 7 and 8.
Configuring channels for internal compressor activation.
Common issues encountered during recording.
Common problems encountered during editing.
List of inquiry messages and Fostex device information.
Instructions for cleaning the exterior of the unit.
Detailed technical specifications of the VF-16.
List of Fostex distributors in European countries.
