Fostex VF-16 - Saving on the Memory key and Mark key; ABS Locate Procedures

31
Saving on the Memory key and Mark key
1. Ensure the system is in the PLAY or STOP status. Press
the [HOLD/>] key at the time to save.
The time is held on the LCD at the point the [HOLD/>]
key is pressed.
2. Press the [STORE] key (RED: Light ON).
3-1. Press a voluntary Memory key.
The time held is saved as a point of the Memory Key, and
then the system returns to the Normal Display.
3-2. Press the [MARK 1-7] key while the [SHIFT] key is
depressed.
The time held is saved as a Mark Memory of MARK 1-7,
and the system returns to the Normal Display.
Direct Location of Memory key or Mark key
1-1. Press a voluntary Memory key.
The name of the key pressed and the point saved appears
on the LCD.
1-2. Press the [MARK 1-7] key while the [SHIFT] key is
depressed.
The name of the Mark Memory and the time saved
appears on the LCD.
2. Press the [LOCATE] key.
This allows Direct Location to the time shown.
Tips: PREROLL
By setting “PREROLL” in the SETUP mode, it is possible to
locate the time (0-10 seconds) several seconds before the
time set to locate.
Changing the Time Saved in the Memory key
and Mark key
1-1. Press a voluntary Memory key.
The name of the key pressed and the point saved appears
on the LCD.
1-2. Press the [MARK 1-7] key while the [SHIFT] key is
depressed.
The name of the Mark Memory and the time saved
appears on the LCD.
2. Change the parameter of the flashing column (cursor)
(H/M/S/F/SF or BAR/BEAT/CLK) using the [JOG] dial.
Move the flashing column (cursor) by pressing the
[HOLD/>] key.
3. Press the [STORE] key (RED: Light ON).
3-1. Press a voluntary Memory key.
The time modified is saved as the time point of the
Memory Key, and the system returns to the Normal
Display.
3-2. Press the [MARK 1-7] key while the [SHIFT] key is
depressed.
The time modified is saved as a Mark Memory of MARK
1-7, and the system returns to the Normal Display.
ABS Locate
There are 2 types of ABS Locate procedures. The instructions are described below.
* Press the [REWIND] key while the [STOP] key is depressed to locate ABS 0 which is the head of the program.
That head is located for all time bases.
* Press the [F FWD] key while the [STOP] key is depressed to locate the REC end time of the last recording (REC END).
This is a convenient feature to search the end of a song or to find out how long a song is.
This Locate feature is available for all tracks from 1-24.