Need help?Do you have a question about the Fostex E-2 and is the answer not in the manual?
General| Number of Tracks | 2 |
|---|---|
| Sample Rate | N/A (Analog) |
| Bit Depth | N/A (Analog) |
| MIDI | No |
| Heads | 3 (Erase, Record, Playback) |
| Power Consumption | 40W |
| Recording Medium | 1/4" magnetic tape |
| Tape Speed | 7.5 ips |
| Reel Size | 7 inch |
| Power Supply | AC 220V/240V |
Control for adjusting tape speed variation ±15%.
Selects recording/playback speeds for E-2 and E-22 models.
Selects channels (L, R, CUE) for recording operations.
Determines the source monitored by meters and outputs.
Guide for mounting the E-2/E-22 meter section onto the MB-2 Meter Bridge.
Instructions for mounting the unit in standard 19-inch racks.
Details on pin assignments for balanced XLR input/output connectors.
Procedure for setting bias level for specific tape types.
Step-by-step guide for correctly loading tape onto the transport.
Explanation of tape movement controls like PLAY, REWIND, F.FWD.
Procedures for recording new tracks and adding layers.
Methods for seamless insertion and removal of audio during playback.
Steps for cleaning tape path components and neutralizing magnetic fields.
Verifying playback accuracy using test tapes.
Setting bias current and recording levels for tape compatibility.
Checking and adjusting recording performance and frequency response.
To Next Page
