Fostex HP-A8C User Manual

14
Listening
Changing the settings
You can change the settings according to your environment.
1 Press and hold the input sel switch on
the main unit or press the MENU key
on the remote controller.
The menu screen is displayed.
2 Turn the input sel knob on the main
unit or press the </> key on the
remote controller to select the item to
change.
"

" on the rst line indicates the selected
item.
3 Press the input sel switch on the main
unit or press the  key on the remote
controller to select the current item.
"

" on the second line indicates the selected
setting value.
4 Turn the input sel knob on the main
unit or press the </> key on the
remote controller to select the setting
value.
5 Press the input sel switch on the main
unit or press the  key on the remote
controller to apply the current setting
value.
6 Press and hold input sel switch on the
main unit or press the MENU key on
the remote controller.
The display changes from the menu screen
to the normal screen.
 Setting item list
Setting item Setting value
"AMP GAIN"
Selects the gain according
to the sensitivity of your
headphones.
Default: "0 dB"
"0 dB" to "20 dB" (0.5 dB step)
"UP SAMPLING"
Activates the upsampling
function.
* The product upsamples up to
192 kHz. This function does not
aect DSD signals.
Default: "×1"
"x 1", "x 2", "x 4"

Fostex HP-A8C Specifications

General

Brand	Fostex
Model	HP-A8C
Category	Amplifier
Language	English