16
Listening
Setting item Setting value
"INPUT SEL MODE"
Selects the function of the
input sel switch on the main
unit or the INPUT SEL key on
the remote controller.
Default: "INCREMENT"
"INCREMENT"
The input source will change at every operation of the
input sel knob on the main unit or the INPUT SEL key
on the remote controller.
"DIRECT SELECT"
To change the input source, select the desired source rst
with the input sel on the main unit or the INPUT SEL
key on the remote controller, and then press the input
sel switch on the main unit or the key on the remote
controller.
You can change to the desired source quickly by skipping
unnecessary sources.
"SD REPEAT MODE"
Selects the repeat range of the
SD card playback.
Default: "FOLDER"
"FOLDER"
Repeats the current folder ("F" indicator is displayed).
"ALL"
Repeats the whole card ("A" indicator is displayed).
"SINGLE"
Repeats the current le ("1" indicator is displayed).
"LCD ON/OFF"
Selects the lighting pattern of
the LCD display.
Default: "O
N"
"ON":
LCD is always on.
"OFF":
LCD turns o 8 seconds after the operation.
"AUTO POWER OFF"
Selects the ''AUTO POWER OFF''
mode ON or OFF.
Default: ''ON''
"ON":
The HP-A8C will automatically turn OFF the power, when
the operation continues for about 30 minutes.
"OFF'':
The HP-A8C does not automatically power OFF. i.e., it
keeps powering ON even after 30 minutes of operation.
"SYSTEM INFO"
Displays the current software
version.
Default: "VerX.XXX"
"VerX.XXX"
Current version.
"VERSION UP"
Executes the update. (page 18)
"RESET"
Returns to the factory settings (page 17).
To Next Page
Loading...
Need help?
General
