Need help?Do you have a question about the Fostex RD-8 and is the answer not in the manual?
General| Number of Tracks | 8 |
|---|---|
| Type | Digital Multitrack Recorder |
| Recording Format | WAV |
| Recording Media | SD Card |
| Sample Rate | 44.1 kHz / 48 kHz |
| Bit Depth | 16-bit |
| Input Connectors | 8 x 1/4" TRS phone (balanced/unbalanced) |
| Output Connectors | TRS |
| Digital I/O | S/PDIF (optical) |
| Frequency Response | 20Hz - 20kHz (±1dB) |
| Dynamic Range | >90dB |
| THD+N | < 0.05% |
| Power Supply | AC adapter / Batteries |
Details how to connect the RD-8 to external audio equipment.
Instructions for powering on the RD-8 and initial display checks.
Essential guide to preparing a tape for recording.
Steps for setting up tracks and levels for recording.
Procedures for initiating and managing recording sessions.
Methods for playing back recorded material.
Detailed steps and considerations for formatting tapes.
Controls for enabling tracks and monitoring input signals.
Operation of transport buttons like Eject, Rewind, Fast Forward.
Setting up automatic recording based on mark points.
Selecting internal or external clock sources.
Enabling and configuring chase modes for synchronization.
Using the RD-8 as a multitrack recorder/mastering deck.
Interconnecting multiple RD-8s or ADATs.
Setting up slave machines for synchronization.
How to enable individual tracks for recording.
Common problems and their solutions for the RD-8.
To Next Page
