Fostex VM88 - Application Examples

12
Model VM88 Owner’s Manual
Application Examples
< Example 1 > :
As a live performance keyboard mixer
The VM88 can be used as a submixer for
keyboards and sound source modules. Scene
memory in which the sound balance has been
set can be switched with a foot switch.
The following are actual examples in application of VM88 and could be helpful in your application.
< Example 2 > :
As a live performance keyboard mixer with sync
In addition to the keyboard and sound source
module mix, playback of ADAT sound can be
mixed simultaneously. By outputting a track
containing a click from the AUX SEND jacks via
the pre-fader, a cue can be sent to the monitor
headphone and the drummer.
< Example 3 > :
As a small PA mixer
The VM88 can be used as a PA mixer with two
channels of monitor sends.
Balance can be pre-stored in the scene memory
and sequentially called in accordance to the
script.
< Example 4 > :
As a recording mixer (overdub) for an ADAT
recorder
Overdubbing of ADAT or one-time recording of
8 tracks is possible by setting Digital In to [ADAT-
All Ch] and Digital Out to [ADAT Dir].
Playback monitor level is adjusted via the fader
and the recording level by the TRIM knob.
Model 8051
PA mixer
Keyboard
Sound module
VM88
D-108 etc.
Digital Recorder
PH50
Model 8051
Headphone
PA mixer
Keyboard
Sound module
AUX
ADAT
VM88
Recorder
Sound module
CD player
AUX 1
AUX 2
SPA11
SPA11
(monitor)
(main)
VM88
Digital recorder
Sound source
D-108 etc.
ADAT
ADAT
Keyboard
Headphone
VM88