To Next PageTo Next Page
Need help?Do you have a question about the Fostex LM16 and is the answer not in the manual?
General| Brand | Fostex |
|---|---|
| Model | LM16 |
| Category | Music Mixer |
| Language | English |
Illustrates connecting the LM16 for live stage audio setups.
Shows how to connect the LM16 for home recording applications.
Explains the types of balanced and unbalanced audio connections supported.
Guidelines for connecting the LM16 to a power source safely and correctly.
Important considerations for installing the LM16 in various environments.
Information regarding future software updates and self-upgrade procedures.
Describes the LM16's modular design and its suitability for different applications.
Highlights the main functionalities and capabilities of the LM16 mixer.
Instructions for unboxing and checking the LM16 contents.
Demonstrates flexible ways to set up and connect the LM16 units.
Step-by-step guide for physically connecting the LM16's main and control units.
Procedure for connecting the power cord to the LM16 and AC outlet.
Correct sequence for turning the LM16 and connected devices on and off.
Illustrates connecting the LM16 for live stage audio setups.
Shows how to connect the LM16 for home recording applications.
Explains the types of balanced and unbalanced audio connectors used with the LM16.
Identifies and describes the connectors on the rear of the LM16 main unit.
Identifies and describes the connectors on the rear of the LM16 control unit.
Details the controls and functions on the top surface of the LM16 control unit.
Explains the function of each control for input channels 1 through 16.
Describes the controls and functions related to the master output and monitoring sections.
Details the various input and output connectors on the rear of the LM16 main unit.
Illustrates the path audio signals take through the LM16 mixer.
How to connect microphones and line-level sources to the input connectors.
Instructions for enabling or disabling 48V phantom power for microphones.
How to choose between INPUT and SUB IN for channels 15 and 16.
Guidance on using the TRIM control for optimal input signal gain.
How to adjust input gain while monitoring signals via headphones or speakers.
Explanation of the low-cut filter for reducing low frequencies.
How to use the limiter to prevent signal clipping.
How to isolate and listen to individual channels or busses using the SOLO switches.
Using group busses to manage and control multiple channels simultaneously.
Connecting external stereo sources like CD players to the SUB IN jacks.
A visual representation of the LM16's internal signal paths and processing blocks.
Details the high-frequency shelving EQ adjustment.
Details the mid-frequency peaking EQ adjustment.
Details the low-frequency shelving EQ adjustment.
Guide on routing signals to external effects units via AUX sends.
Explains the difference between pre-fader and post-fader signal routing for AUX sends.
How to connect external processors for channel-specific effects via insert jacks.
Steps for activating and adjusting the LM16's built-in reverb/delay effects.
Description of the available internal reverb and delay effect types.
How to monitor signals using headphones and speakers via the MONITOR SELECT switch.
Procedure to display the LM16's installed firmware version.
Step-by-step guide to update the LM16 firmware using a USB memory stick.
Detailed list of all input and output connectors and their electrical characteristics.
Information on dimensions, weight, and power requirements of the LM16.
Diagrams showing the physical size and layout of the main and control units.
List of supported MIDI Machine Control commands for external device control.
Table detailing MIDI message transmission and recognition capabilities.
Statement on the LM16's compliance with EMC and Low Voltage Directives.
Details of the warranty coverage, limitations, and exclusions for US customers.
