Fostex XR-3 - Basic Recording Guide; Initial XR-3 Settings

CHAPTER
■
■
Basic Guide "Let's Start Recording"
4
Basic Guide "Let's Start Recording"
i
Initial setting of the XR-3
You need to organize all the knobs and switches between steps or sessions. This means that
you will set the position of the switches and knobs to their initial settings in order to avoid
an unexpected problem that may be caused by operating the XR-3 with incorrect settings.
•These are called the "initial settings" in this manual.
The initial settings of all switches and knobs are shown in the following diagram.
Before proceeding to the next session, be sure to set the XR-3 to the "initial settings."
Set all the PAN controls to
the center position, and all
the.GAIN knobs to the
level. to OFF.
12