Fostex XR-3 - Application Guide; Punch In;Out Recording Overview

Application Guide
Now you understand howto perform basic recording and multi-track recording as described
in the Basic Guide. Here, in the Application Guide, we will introduce you to more advanced
recording methods: punch in/out recording, and ping-pong recording.
Punch In/Out Recording
Punch in/out recording allows you to re-record part of a recorded track by placing the part
in a temporary recording status.
This function is useful when you wish to replace an out-of-tune part of a vocal or a mistake
in a phrase with a correct sound.
Miiiniiiiimiiiiiniiiimiiiiimimiiim ( n ^ One-Point Advice! .mum....
To perform punch in/out recording, first play back the tape to shortly before the part you wish
to replace. Then start recording at the gap between the phrases. This is called "punch in."
After recording the part correctly, return to playback status. This is called "punch out." You
need to use an optional footswitch (Model 8051) to perform punch in/out recording.
iiiimmmmmmmmmmmmmmmmmmiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiitiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
The following diagram shows how punch-in/out recording is performed.
<Example> Correcting a part on Track 4: (REC SEL switch 4-» ON)
22