Fostex XR-3 User Manual

FF button
Pressing this button will fast forward the tape at a high speed.
REW button
Pressing this button will rewind the tape at a high speed.
REC button
When any of the Record Track indicators is flashing, press this button and the PLAY button
simultaneously to start recording. (If the PAUSE button is on, the XR-3 engages recording
stand-by mode, and the tape remains stopped.)
When recording starts, the Record indicator lights up, and the Record Track indicator of the
selected track changes from flashing to lit.
Note:------
This button is not effective if the record protect tub on the cassette tape is broken.
©Record indicator [REC]
This indicator lights up in red in recording mode.
©Auto Bounce Level dial [Auto Bounce LEVEL]
This dial allows you to adjust the final recording level of the tracks for ping-pong recording.
First, adjust the track playback signal level using the GAIN control, then adjust the final level
of ping-pong recording using this dial.
©Auto Bounce On/Off switch [Auto Bounce]
This switch allows you to turn the Auto-bounce function (ping-pong) on/off. Pressing this
switch once turns the function on, and pressing it again turns the function off.
Note: —----—_
You cannot set this switch OFF during ping-pong recording.
© Auto Bounce ON/OFF indicator
This indicator I ights up when the Auto Bounce switch is on, and it goes off when the switch
is off.
® Master fader [MASTER]
The Master fader allows you to adjust the volume level of the output level at LINE OUT UR
and the headphones.
9

Fostex XR-3 Specifications

General

Brand	Fostex
Model	XR-3
Category	Recording Equipment
Language	English