18
Default zooming
If you usually need to view a specific time frame (i.e. workday hours), use the Default
zooming tool. You can set the start and end time of the time span and then use it
whenever you open a file or download data from the MicroLite.
To set the default zoom:
1. Click Graph Properties on the graph toolbar, and then click Set Default Zoom.
2. Enter the start and end times, then click Set.
To zoom to the default zoom:
1. Click Graph Properties on the graph toolbar.
2. Check the Use default zoom check box and click OK.
Every file and every data recording you download will automatically open in the default
zoom as long as the Use default zoom check box remains selected.
To restore auto scaling, click Autoscale .
The Stretch/Compress Axis Tool
Move the cursor onto one of graph axes. The cursor icon changes to a double arrow
symbol (↔), indicating that you can stretch or compress the axis scale. Drag the symbol
to the desired location. Repeat the procedure for the other axis, if necessary.
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
esis.enq@esis.com.au
To Next Page
Loading...
