Fox Easy Dome XS - About Your Easy Dome XS; Easy Dome XS Material; Maintenance of Easy Dome XS

GB
3
GB
2
EASY DOME XS
EASY DOME XS
1. All fabrics are affected by temperature. For example, the
amount of moisture in the air or the colder the temperature,
the worse the condensation will become and the harder it will
be for the material to deal with it.
2. Cold, damp conditions will cause the material to go slack,
whilst hot/dry temperatures will cause the material to tighten.
This is normal.
3. To maintain its performance, we recommend that the cover is
treated with a reputable re-proofing agent specifically
designed to be compatible with PU coated nylons. When it
needs doing is really a matter of how often you use your
Easy Dome XS. As a rule of thumb, any water should
‘bead up’ and run off rather than soaking into the material.
How do I store my Easy Dome
XS?
You should ensure the Easy Dome
XS is dry before being stored
away. If this was not possible at
the end of your session, you
should allow it to dry out
thoroughly when you get home.
Easy Dome XS Material
Maintenance of my
Easy Dome XS
About your
Congratulations on purchasing
the Fox Easy Dome XS
manufactured from the highest
quality 200D Nylon with a
TEFLON® coated 5000mm
Hydrostatic Head. The Easy
Dome XS offers a twin skin
construction that helps to
reduce condensation as well as
a quick erect system avoiding the need to thread through poles. Treated properly and maintained correctly,
it will provide you with outstanding performance season after season. This leaflet details some of the
things you should know about your Easy Dome XS.