ASSEMBLY
ATTENTION !
Ensure that the machine is switched off and disconnected from the mains before assembling or making any
other adjustments.
MOUNTING THE THICKNESSER ONTO A WOOD BASE
If the thicknesser is not mounted on a stand, we recommend that it is mounted on two pieces of lumber to ensure
maximum stability.
Choose two suitable pieces of wood.
Use the four M8 x 2" hexagonal socket head screws (supplied) to mount the thicknesser base onto the wood.
STOCK ROLLERS
Two rollers are built on top of the thicknesser, providing convenient handling of stock for consecutive cutting operations.
MOVING THE THICKNESSER
The thicknesser can be moved by carrying it using the handles on the right and left of the frame. Close the table
extensions before you move the thicknesser.
WARNING
Ensure the thicknesser is switched off and disconnected from the power supply before you move it.
To Next Page
Loading...
General