14
Front side of the machine FIG.1
1. Door of the upper flywheel
2. Knob for the adjustment of bandsaw’s
tensioning FIG.5
3. Blade’s upper flywheel
4. Knob locking for the protection blade
5. Protection
6. Bandsaw’s saw blade
7. Workbench
8. Guiding rail with graduated scale
9. Lower flywheel
11. Rip and trimming fence
12. Door of the lower flywheel
13. ON / OFF switch
Back side of the machine FIG.1
14. Knob for the adjustment of the upper
flywheel
15. Motor
16. Base
17. Dust collection sleeve
18.
19. Bench inlay
To Next Page
Loading...
